ABS Furnishing Co.

• Partition panel has an inner frame consisting of vertical uprights & horizontal bracings. Upright is fabricated of 1.6 mm thick Aluminium frame.
• The thickness of this inner frame is 35 mm.
• The brackets for supporting worktops.
• Tiles are available in a variety of configurations and thickness 9 mm.
• The raceway for passing electricity & data wires can be provided at various levels - skirting level, Just below the worktop. The width of the raceway cover is 100 mm.
• The top cover and side covers are made of extruded aluminium sections of thickness 1.3 mm to 1.5 mm.
• The plastic ABS caps are used to join the aluminium runners at various intersections.

 Working Top: -Worktop is made of 25mm pre laminated particle board with 2mm PVC edge banded. Gable Ends of 40x40mm MS Pipe Duly Powder coated with both side Pinup board.

Working Top: -Worktop is made of 25mm pre laminated particle board with 2mm PVC edge banded. Gable Ends of 40x40mm MS Pipe Duly Powder coated with both side Pinup board.

Size Of 1500x700x1950mm(LxWxH) Frame made out of 40mmx40mm 18 gauge CRC pipe duly powder coated 50 to 60 micron

Top Made out  of 18mm pre laminated particle Board with ESD Matt all side PVC edge bidding, pedestal Made out of 18mm  pre laminated particle Board with PVC Edge Bidding Two drawer Equal size & one cupboard with coaster.

Working Top Size of 1500 mm x 700mm x 900mm

Self size of 1500x300mm 18mm pre lam partial Board with ESD Matt

 Upper Top Size of 1500x600mm  made out of 18mm pre lam partial Board with PVC edge bidding

Electric with 2x2.5sq mm copper flexible wire with 1.5 single core earth wires in PVC conduit including 3 nos 2+1switch & socket  of 5 amp & 16 Amp(Brand-wire polycab & havells )

Switch & Socket Standard & Northwest

Material :- Working Table Top and shelves 18mm per laminated  particle board

1.40 x 40 MS steel having thickness 1.9 mm square section pipe.

2. Work Top should be of superior quality with ISI mark laminated board thickness 19 mm with static dissipative MAT grey color.

3. There should be one Bin Rail above the Power Bar Surmounted One no. full length Pin board.

4. Smoked grey color Powder coated finishing.

5. Full length Power panel with 03 nos. of 5A/15 Amp Switch socket and 1 switch for light.

6. Full length and 1 foot width wooden storage above the top.

7. Double tube light with reflector.

8. ESD grounding built into the table frame.

9. Concealed electrical wiring.

10. ESD precautionary sign fixed on the table frame.

11. The work bench will be tested and certified for ESD Safety norms.

Material :- Working Table Top and shelves 18mm per laminated  particle board

1.40 x 40 MS steel having thickness 1.9 mm square section pipe.

2. Work Top should be of superior quality with ISI mark laminated board thickness 19 mm with static dissipative MAT grey color.

3. There should be one Bin Rail above the Power Bar Surmounted One no. full length Pin board.

4. Smoked grey color Powder coated finishing.

5. Full length Power panel with 03 nos. of 5A/15 Amp Switch socket and 1 switch for light.

6. Full length and 1 foot width wooden storage above the top.

7. Double tube light with reflector.

8. ESD grounding built into the table frame.

9. Concealed electrical wiring.

10. ESD precautionary sign fixed on the table frame.

11. The work bench will be tested and certified for ESD Safety norms.

Material :- Working Table Top and shelves 18mm per laminated  particle board

1.40 x 40 MS steel having thickness 1.9 mm square section pipe.

2. Work Top should be of superior quality with ISI mark laminated board thickness 19 mm with static dissipative MAT grey color.

3. There should be one Bin Rail above the Power Bar Surmounted One no. full length Pin board.

4. Smoked grey color Powder coated finishing.

5. Full length Power panel with 03 nos. of 5A/15 Amp Switch socket and 1 switch for light.

6. Full length and 1 foot width wooden storage above the top.

7. Double tube light with reflector.

8. ESD grounding built into the table frame.

9. Concealed electrical wiring.

10. ESD precautionary sign fixed on the table frame.

11. The work bench will be tested and certified for ESD Safety norms.