ABS Furnishing Co.
Nilothi, New Delhi, Delhi
GST No. 07ANBPS9467M2Z4
08046045953 80% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Fume Hood
| Minimum Order Quantity | 1 Piece |
| 6 | measured t 1" from face of HEPA filter |
| 3 | - Illumination800 LUX |
| 2 | - Deign and classification : Class II type B2:- 0% of the air is re-circulated into the work area a |
| 1 | - Inner dimension (mm) : 1200x600x600 (4ftx2ftx2ft) |
| 4 | - UV light : 30W |
| 5 | - Air Flow velocity : 90+-20 FPM (0.3-0.5 m/s) |
| Country of Origin | Made in India |
· Outer Made of total stainless steel 304 Grade/ Mild Steel
· Working table is made of perforated Stainless Steel Sheet (SS-304 grade).
· All interior surfaces are epoxy painted filter seat is carefully formed, installed and checked for leakage.
· Air Flow: 0% Recirculation & 100% Exhaust.
· Transparent Front vertical rising Door with counter balanced drive unit.
· The highly efficient HEPA filter maintains the optimum cleanliness and purity.
· The pre-filter fitted extends the life of HEPA filter drastically.
· Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger.
· Working area is illuminated by fluorescent lighting fitted to the unit.
· The blower and “MARATHON” motor assembly is statically and dynamically balanced of 1/4 H.P. capacity operates with minimum noise level. Height of the working table provides comfortable "SIT DOWN" working position for the operator.
· Supplied complete with Static Pressure Manometer. Built in U.V. Germicidal Light and Cock for gas, HEPA filters and pre-filter.
· Separate switch operation for blower, UV & FL light and mains.
· Velocity at the output of HEPA is 90 ± 20 FPM (measured at 1” distance from filter face)
· Supplied complete with cord & plug to work on 220 / 230 volts A.C. supply